High-Efficiency 60W LED Driver for Diverse Lighting Solutions

• Customization: Available
• Usage: Light
• Output Type: Single
• Model NO.: ksddri006
• Power Supply Mode: Constant Voltage Source
• Modulation System: PWM
• In-Out: Step-down Type
• Power Supply Voltage: AC85-265
• Pack Sealing Size: SMD
• Brand: Kashidi
• Wire: Customized
• Housing: Plastic
• Watt: 24W/36W/60W/80W/100W
• Application: Cabinet Lighting
• Transport Package: Carton
• Specification: 168*60*20MM
• Trademark: kashidi
• Origin: China
• Production Capacity: 50000 Per Week
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 0.500kg
• Lead Time: 7 days (1 - 1 Pieces) ; To be negotiated ( > 1 Pieces)

Product Description

At Zhongshan Kashidi Optoelectronics Co., Ltd, we are fully prepared to customize our services according to your precise needs. Please share your comprehensive requirements along with any reference images so that we may assist you with the utmost efficiency.

Performance Parameters

Model		LGDD-12060
Output	Dc Voltage	12V
	Rated Current	2A /3A/5A
	Current Range	0~5A
	Rated Power	24W/36W/60W
	Ripple&Noise(Max)	150mV
	Voltage Tolerance	±4%
	Setup,Rise Time	100ms/220VAC
	Hold Up Time(Typ.)	80ms/220VAC
Input	Voltage Range	100~265VAC
	Frequency Range	47~60Hz
	Power Factor(Typ)	PF>0.6/220VAC
	Efficiency(Typ)	86%
	Short Circuit	Protection type: recovers automatically after fault conditions is removed
	Overlaod	Overload protection @145~160%above peak rating
	Over Temperature	protection typer:shut down o/p voltage.re-power on to recover
Environment	Working Temp	-20~50ºC
	Working Humidity	20~90% RH no-condensing (Waterproof)
	Storage Temp Humidity	-40~ +60ºC,10~90%RH
Safety&Emc	Safety Standards	CE Mark (LVD)
	Withstand Voltage	I/P-O/P:1.5KVAC   IP-GND:1.5KVAC

NOTE
1. All parameters not explicitly specified are assessed under a 220VAC input, rated load, and ambient temperature of 25ºC.
2. Ripple & noise are measured at a 20MHz bandwidth employing a 12'' twisted pair-wire, finished with a 0.1uf and 10uf parallel capacitor.
3. Tolerance: This includes setup tolerance, line regulation, and load regulation.

FAQ:

Q1: Are you a manufacturer or a trade company?
A1: We are a dedicated manufacturer with our own factory, ensuring impeccable quality and prompt delivery of every product.

Q2. Can I have a sample order for an LED light?
A2: Certainly! We gladly accept sample orders to assess and confirm the quality. Mixed samples are welcome as well.

Q3. What about the lead time?
A3: Sample orders take approximately 3 days. For larger orders, expect a lead time of 1-2 weeks.

Q4. Do you have any MOQ limit for LED light orders?
A4: Our MOQ is extremely low; even a single piece is available for sample evaluation.

Q5. How do you ship the goods and how long does it take to arrive?
A5: We commonly ship via DHL, UPS, FedEx, or ***, with a typical delivery time of 3-5 days. Airline and sea shipping options are also offered.

Q6. What about payment options?
A6: We accept Bank Transfer (TT), PayPal, Western Union, and Trade Assurance. An initial payment of 30% is required, with the remaining 70% due before shipment.
30% of the total amount must be paid before production, with the balance of 70% required before shipment.

Q7. Is it OK to print my logo on the LED light product?
A7: Yes, absolutely. Please notify us formally prior to production and confirm the design based on our sample.

Q8: How do you handle faulty products?
A8: Firstly, our products are subjected to stringent quality checks, limiting defects to below 0.1%. Secondly, within the warranty period, we will repair or replace any defective products.